Eclipse Combustion F8000 Series Service/ Provozní pokyny stáhnout pdf (Strana 34)

3-6

Refer to Figure [3-6]. The manual backup pump is used to operate the lift if there is no electrical

power (the manual backup pump is shown within the standard pump enclosure). The controls

for the pump consist of the pump handle extension (installed by the vehicle manufacturer near

the pump or stored within the optional pump enclosure cover) for raising the lift platform and the

pump release valve for lowering.

FIGURE [3-6]: STANDARD PUMP ENCLOSURE

a. To Raise Platform Manually

Refer to Figure [3-7]. To raise the platform manually, insert the pump handle extension onto

the pump release valve. Make sure the notches at the end of the handle are fully engaged

by the release valve pin. Twist the handle CLOCKWISE until lightly-snug to make sure that

the pump is in the “raise mode”. Insert the handle extension into pump handle socket and

move the handle extension UP and DOWN to raise the platform.

FIGURE [3-7]: PLATFORM MANUAL RAISING

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 76 77

Žádné komentáře

Eclipse Combustion F8000 Series Service/ Provozní pokyny Strana 34